Luminometer

LUmo

Luminometer LUmo

 

Autobio LUmo is a state of the art microplate luminometer, designed to meet the demanding requirements of today’s microplate based, glow luminescence applications.

Product highlights

High sensitivity 1 x 10-23 mole HRP

… allows detection of lower analyte concentrations, earlier diagnosis of diseases and efficient tracing of treatments.

Large dynamic range 0 to 1.6 x 109 RLU
… significantly increases assay linearity and enables reliable interpretation of very low and very high analyte concentrations in one test run without additional sample dilution.

Very low crosstalk
LUmo incorporates a sophisticated, adaptive positioning system, keeping the detector as close as possible above the sample to eliminate instrument related crosstalk and make optimum use of LUmo‘s high sensitivity and dynamic.

Speed
It takes typically less than 40 seconds to read a 96-well plate at 0.1 sec integration time. With fast Luminol-based reaction systems, high reading speed greatly improves assay precision across a plate.

Specifications LUmo

Detection system

Photomultiplier module

Detection mode

Glow luminescence

Spectral Range

300 – 650nm

Dynamic / Indication Range

0 – 1.600.000.000 RLU

Measurement unit

RLU (Relative Light Units)

Sensitivity at 545nm

1 x 10-23 mole HRP

Repeatability

< 2%

Crosstalk

< 1 x 10-7 (typical)

Measurement time

typically <40 seconds at 0.1 sec. integration time for a 96-well plate

Integration time

0.1 sec to 10 sec in increments of 0.1sec

Plate types

96-well and 48-well (4×12) microplates, max. height 15.2 mm

Shaking

3 modes

Dimensions

33.5cm x 20.5cm x 47.0 cm (w x h x l)

Weight

~13.0kg net

Power supply

external

voltage range

100-240VAC ±10%, 47-63Hz

Data connections

Serial Interface RS232 (9-pin), USB 2.0

Environmental conditions

Operating

Temperature: 10°C to 40°C
Humidity: 15%-75% RH non-condensing

Storage

Temperature: -10°C to 50°C Humidity: <95% RH non-condensing

Scope of supply

Instrument, power supply, power cable, dustcover, serial cable, USB cable, AUTOsoft – Autobio Control and Evaluation Software (Windows®) and user manual on CD